With Intelligent Key System

VEHICLE SPEED SENSING AUTO LOCK OPERATION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK "AUTOMATIC LOCK/UNLOCK SELECT" SETTING IN "WORK SUPPORT"

1.Select "DOOR LOCK" of "BCM" using CONSULT.
2.Select "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT" mode.
3.Check "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT".
With Intelligent Key System.
Is the inspection result normal?
YES- GO TO 2.
NO- Set "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT".

2. CHECK "AUTOMATIC DOOR LOCK SELECT" SETTING IN "WORK SUPPORT"

1.Select "DOOR LOCK" of "BCM" using CONSULT.
2.Select "AUTOMATIC DOOR LOCK SELECT" in "WORK SUPPORT" mode.
3.Check "AUTOMATIC DOOR LOCK SELECT" in "WORK SUPPORT".
With Intelligent Key System.
Is the inspection result normal?
YES- GO TO 3.
NO- Set "AUTOMATIC DOOR LOCK SELECT" in "WORK SUPPORT".

3. REPLACE BCM

1.Replace BCM. With Intelligent Key System.
2.Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Intermittent Incident.