Without Intelligent Key System

AUTO DOOR LOCK OPERATION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK "AUTO LOCK SET" SETTING WITH CONSULT

1.Select "MULTI REMOTE ENT" of "BCM" using CONSULT.
2.Select "AUTO LOCK SET" in "WORK SUPPORT" mode.
3.Check "AUTO LOCK SET" in "WORK SUPPORT".
Door & Lock.
Is the inspection result normal?
YES- GO TO 2.
NO- Set "AUTO LOCK SET" in "WORK SUPPORT".

2. REPLACE BCM

1.Replace BCM. Service and Repair.
2.Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Intermittent Incident.