With Intelligent Key System

AUTO DOOR LOCK OPERATION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK "AUTO LOCK SET" SETTING IN "WORK SUPPORT"

1.Select "INTELLIGENT KEY" of "BCM" using CONSULT.
2.Select "AUTO LOCK SET" in "WORK SUPPORT" mode.
3.Check "AUTO LOCK SET" in "WORK SUPPORT".
Intelligent Key.
Is the inspection result normal?
YES- GO TO 2.
NO- Set "AUTO LOCK SET" setting in "WORK SUPPORT".

2. REPLACE BCM

1.Replace BCM. With Intelligent Key System.
2.Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Intermittent Incident.