P Position Warning Does Not Operate

P POSITION WARNING DOES NOT OPERATE

Diagnosis Procedure


1. CHECK DTC WITH BCM, TCM AND COMBINATION METER

Check that DTC is not detected with BCM, TCM and combination meter.
Is the inspection result normal?
YES- GO TO 2.
NO-1- Testing and Inspection. (BCM)
NO-2- Testing and Inspection. (TCM)
NO-3- Testing and Inspection. (Combination meter)

2. CHECK COMBINATION METER BUZZER

Check combination meter buzzer.
Meter Buzzer Circuit.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.
Intelligent Key Warning Buzzer.
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. CHECK DOOR SWITCH

Check front door switch (driver side).
With Intelligent Key System.
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace the malfunctioning parts.

5. CHECK INSIDE KEY ANTENNA

Check inside key antenna.
- Instrument center: B2621.
- Console: B2622.
- Luggage room: B2623.
Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace the malfunctioning parts.

6. CHECK KEY WARNING LAMP

Check key warning lamp.
Key Warning Lamp.
Is the inspection result normal?
YES- GO TO 7.
NO- Repair or replace the malfunctioning parts.

7. REPLACE BCM

1.Replace BCM. With Intelligent Key System.
2.Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Intermittent Incident.