Without Intelligent Key System

VEHICLE SECURITY ALARM DOES NOT ACTIVATE

Description

Alarm does not operate when alarm operating condition is satisfied.
NOTE:
Check that vehicle is under the condition shown in "CONDITIONS OF VEHICLE (OPERATING CONDITIONS)" before starting diagnosis, and check each symptom.

CONDITION OF VEHICLE (OPERATING CONDITIONS)

"SECURITY ALARM SET": ON
Check the setting of "SECURITY ALARM SET" in "Work Support" mode of "THEFT ALM" of "BCM" using
CONSULT.


Diagnosis Procedure


1. CHECK DOOR SWITCH

Check door switch.
Without Intelligent Key System.
Is the inspection result normal?
YES- GO TO 2.
NO- Replace the malfunctioning door switch

2. CHECK HEADLAMP FUNCTION

Check headlamp function.
Without Intelligent Key System.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace malfunctioning parts.

3. CHECK HORN FUNCTION

Check horn function.
Without Intelligent Key System.
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Intermittent Incident.
NO- GO TO 1.