With Intelligent Key System

SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK "DOOR LOCK-UNLOCK SET" SETTING IN "WORK SUPPORT"

1.Select "DOOR LOCK" of "BCM" using CONSULT.
2.Select "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT" mode.
3.Check "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT"
With Intelligent Key System.
Is the inspection result normal?
YES- GO TO 2
NO- Set "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT".

2. REPLACE BCM

1.Replace BCM. With Intelligent Key System.
2.Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Intermittent Incident.