Key ID Warning Does Not Operate

KEY ID WARNING DOES NOT OPERATE

Diagnosis Procedure


1. CHECK DTC WITH BCM AND COMBINATION METER

Check that DTC is not detected with BCM and combination meter.
Is the inspection result normal?
YES- GO TO 2.
NO-1- Testing and Inspection. (BCM)
NO-2- Testing and Inspection. (Combination meter)

2. CHECK INTELLIGENT KEY

Check Intelligent Key.
Intelligent Key.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. CHECK INSIDE KEY ANTENNA

Check inside key antenna.
- Instrument center: B2621.
- Console: B2622.
- Luggage room: B2623.
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. CHECK KEY WARNING LAMP

Check key warning lamp.
Key Warning Lamp.
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace the malfunctioning parts.

5. REPLACE BCM

1.Replace BCM. With Intelligent Key System.
2.Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Intermittent Incident.