Work Procedure

KEYFOB ID REGISTRATION

Work Procedure


1. STEP 1

Close all doors.
- GO TO 2.

2. STEP 2

Operate lock using the driver side door lock and unlock switch.
- GO TO 3.

3. STEP 3

1.Remove and insert the key into the ignition key 6 times within 10seconds (turning
the key switch from OFF to ON counts as 1 time).
2.Hazard warning lamp blinks(2 times).
NOTE:
On the sixth key insertion, keep the key in the cylinder with the key switch ON.
Does the hazard lamp blink?
YES- GO TO 4.
NO- GO TO 1.

4. STEP 4

Within 3 seconds after the hazard lamp blinks, turn ignition switch to the ACC position and operate lock using the driver side door lock and unlock switch.
- GO TO 5.

5. STEP 5

1.Press the lock or unlock button of the keyfob to be added.
2.All doors unlock simultaneously.
3.Hazard warning lamp blinks(2 times).
4.Key ID is registered.
Is key ID registered?
YES-1- When adding a keyfob: GO TO 6.
YES-2- When ending registration: GO TO 8.
NO- GO TO 1.

6. STEP 6

Operate lock using the driver side door lock and unlock switch.
- GO TO 7.

7. STEP 7

1.Press the lock or unlock button of the keyfob to be added.
2.All doors unlock simultaneously.
3.Hazard warning lamp blinks(2 times).
4.Key ID is registered.
Is key ID registered?
YES-1- When adding a keyfob: GO TO 6.
YES-2- When ending registration: GO TO 8.
NO- GO TO 6.

8. STEP 8

Open the front door driver side.
- REGISTRATION END