CONSULT Function

DIAGNOSIS SYSTEM (TCM)

CONSULT Function (TRANSMISSION)


FUNCTION

CONSULT can display each diagnostic item using the diagnostic test modes shown following.






SELF DIAGNOSTIC RESULTS MODE

Testing and Inspection.

DATA MONITOR MODE

Display Items List
X: Standard, -: Not applicable, : Option
















WORK SUPPORT MODE

Display Item List





Engine Brake Adjustment
Under normal operating conditions of the transaxle main body and CVT system, if a customer indicates strangeness of involuntary application of the brake on a downhill run, engine brake is allowed to be released in accordance with "Engine Brake Adjustment".





CAUTION:
Mode of "+1", "0", "-1", "-2", "OFF" can be selected by touching "UP" or "DOWN" on CONSULT
screen. However, do not select mode other than "0" and "OFF". Selecting "+1" or "-1" or "-2" is selected, that may cause irregular driveability.
Conform CVTF Deterioration
- Check CVT fluid deterioration level when driving under severe conditions.





- How to Erase CVT Fluid Deterioration Date
- Select "clear".
Calibration Data
After replacing transaxle assembly, it is necessary to initialize ROM data of TCM. Checking calibration data makes it possible to check that initialization is successful.