Shift Position Indicator Circuit

SHIFT POSITION INDICATOR CIRCUIT

Description

TCM transmits shift position signal to combination meter via CAN communication. The actual shift position is displayed on combination meter according to the signal.


Component Function Check


1. CHECK SHIFT POSITION INDICATOR

1.Start the engine.
2.Shift selector lever.
3.Check that the selector lever position and shift position indicator on combination meter are equivalent.
Is the inspection result normal?
YES- INSPECTION END
NO- Go to .


Diagnosis Procedure


1. CHECK TCM INPUT AND OUTPUT SIGNALS

With CONSULT
1.Start the engine.
2.Select "Data Monitor" in "TRANSMISSION".
3.Select "RANGE".
4.Shift selector lever.
5.Check that selector lever position, "RANGE" on CONSULT screen, and shift position indicator display on combination meter are identical.
Is the inspection result normal?
YES- INSPECTION END
NO-1 ("RANGE" is changed but is not displayed on shift position indicator.)-Select "Self Diagnostic
Results" in "TRANSMISSION".
NO-2 ("RANGE" differs from shift position indicator.)-Select "Self Diagnostic Results" in "TRANSMISSION".
NO-3 (Specific"RANGE" is not displayed on shift position indicator.)-Select "Self Diagnostic Results" in
"METER/M&A".