Removal And Installation

CONTROL CABLE

Removal and Installation


REMOVAL


CAUTION:
Make sure that parking brake is applied before removal/installation.
1.Remove battery. Exploded View.
2.Remove air duct (inlet), air duct and air cleaner case. Exploded View.
3.Remove battery bracket.
4.Remove control cable fitting nut from control cable.
5.Remove lock plate from bracket.
6.Remove control cable from bracket.
7.Remove control cable from CVT shift selector assembly. Exploded View.
8.Remove control cable from vehicle.
9.Remove bracket.

INSTALLATION

Note the following, and install in the reverse order of removal.





When installing control cable (1) to CVT shift selector assembly (2), check that control cable is fully pressed in with the ribbed (A) surface facing upward.

White arrow indicates : Vehicle front