Inspection

TRANSAXLE ASSEMBLY

Inspection and Adjustment


INSPECTION BEFORE INSTALLATION






After inserting a torque converter to transaxle assembly, check dimension "A" within the reference value limit.





Dimension "A": Torque Converter

INSPECTION AFTER INSTALLATION

Check the following.
- Check for CVT fluid leakage and check CVT fluid level. Fluid CVT.
- Check CVT position. Adjustments.
- Start and warm up the engine. Visually check that there is no leakage of engine coolant and CVT fluid.

ADJUSTMENT AFTER INSTALLATION

Perform "ADDITIONAL SERVICE WHEN REPLACE TRANSAXLE ASSEMBLY". Description.