Removal And Installation

OIL PAN

Removal and Installation


REMOVAL

1.Remove engine under cover.
2.Remove drain plug from oil pan and then drain the CVT fluid.





3.Remove oil pan fitting bolts (black arrow), and then remove oil pan and oil pan gasket.

White arrow indicates : Vehicle front

4.Remove magnets from oil pan.

INSTALLATION

Note the following, and install in the reverse order of removal.

CAUTION:
- Never reuse oil pan gasket and drain plug gasket.
- Completely remove all moisture, oil and old gasket, etc. from the oil pan gasket mounting surface of transaxle case and oil pan.