Changing

CVT FLUID

Changing

1.Remove drain plug from oil pan and then the CVT fluid.
2.Remove drain plug gasket from drain plug.
3.Install drain plug gasket to drain plug.

CAUTION:
Never reuse drain plug gasket.
4.Install drain plug to oil pan.
: Exploded View
5.Fill CVT fluid from CVT fluid charging pipe to the specified level.
CVT fluid and fluid capacity: General Specification

CAUTION:
- Always use the specified fluid. If use, misuse, or mixing of fluid other than the specified fluid occurs, original performance cannot be obtained or it may cause serious malfunctions.
- CVT fluid is not reusable. Never reuse CVT fluid.
- Always use shop paper. Never use shop cloth.
- After replacement, always perform CVT fluid leakage check.
- Delete CVT fluid deterioration date with CONSULT after changing CVT fluid.
6.After engine warms up, drive the vehicle in an urban area for approximately 10 minutes.
NOTE:
When ambient temperature is 20�C (68�F), it takes about 10 minutes for the CVT fluid to warm up to 50 to
80�C (122 to 176�F).
7.Check CVT fluid level and condition. Fluid CVT.
8.Repeat steps 1 to 6 if CVT fluid has been contaminated.