Removal and Installation

FRONT COIL SPRING AND STRUT

Removal and Installation


REMOVAL

1.Remove tires with power tool. Exploded View.
2.Remove lock plate. Exploded View.
3.Remove wheel sensor. Exploded View.
4.Remove stabilizer connecting rod from strut assembly. Exploded View.
5.Remove strut assembly from steering knuckle.





6.Remove cowl top cover rid (A).
7.Remove mounting bolts of strut mounting insulator with power tool, and then remove strut assembly.

INSTALLATION

Note the following, and install in the reverse order of removal.





- Become it in ID letter (A) an illustration to the body front side.

White arrow indicates : Vehicle front

- Perform final tightening of bolts and nuts, under unladen conditions with tires on level ground.