Removal And Installation

EVAP CANISTER

Removal and Installation


REMOVAL

1.Lift up the vehicle.
2.Remove EVAP canister fixing bolt.
3.Remove EVAP canister.
NOTE:
The EVAP canister vent control valve and EVAP canister system pressure sensor can be removed without removing the EVAP canister.

INSTALLATION

Install in the reverse order of removal.
NOTE:
Tighten EVAP canister fixing bolt to the specified torque.

DISASSEMBLY






1.Turn EVAP canister vent control valve counterclockwise.
- Lock (A)
- Unlock (B)
2.Remove the EVAP canister vent control valve.

ASSEMBLY

Assemble in the reverse order of disassembly.

CAUTION:
Always replace O-ring with a new one.