Side Turn Signal Lamp

SIDE TURN SIGNAL LAMP

Replacement


CAUTION:
- Disconnect battery negative terminal or remove the fuse.
- Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
- Never touch bulb by hand while it is lit or right after being turned off.
- Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.

SIDE TURN SIGNAL LAMP BULB

1.Remove the side turn signal lamp.
2.Rotate the bulb socket counterclockwise and unlock it.
NOTE:
Support the vehicle-side harness of the side turn signal lamp with tape so that it does not drop inside the front fender.
3.Remove the bulb from the bulb socket.