Rear Combination Lamp

REAR COMBINATION LAMP

Replacement


CAUTION:
- Disconnect the battery negative terminal or the fuse.
- Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
- Never touch bulb by hand while it is lit or right after being turned off.
- Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.

STOP/TAIL LAMP BULB

1.Remove rear combination lamp assembly.
2.Rotate the stop/tail lamp bulb socket counterclockwise, and unlock it.
3.Remove bulb from the bulb socket.

REAR TURN SIGNAL LAMP BULB

1.Remove rear combination lamp assembly.
2.Rotate the rear turn signal lamp bulb socket counterclockwise, and unlock it.
3.Remove bulb from the bulb socket.

BACK-UP LAMP BULB

1.Remove rear combination lamp assembly.
2.Rotate the back-up lamp bulb socket counterclockwise, and unlock it.
3.Remove bulb from the bulb socket.