Removal And Installation

FRONT COMBINATION LAMP

Removal and Installation


REMOVAL


CAUTION:
Disconnect the battery negative terminal or the fuse.
1.Remove front bumper fascia. Exploded View.





2.Remove the harness clips (A)*.
*: When replace a left.
3.Remove the air duct clip*.
*: When replace a left.
4.Remove the headlamp mounting bolts.
5.Pull out the headlamp assembly forward the vehicle.
6.Disconnect the connector before removing the headlamp assembly.

INSTALLATION

Install in the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Description.