Removal And Installation

THERMO CONTROL AMPLIFIER

Removal and Installation


REMOVAL

1.Remove the evaporator. Manual Air Conditioning.
2.Remove the thermo control amp. from the evaporator.

INSTALLATION

Installation is basically the reverse order of removal.

CAUTION:
- Replace O-ring with new one. Then apply compressor oil to them when installing.
- When install the thermo control amp., set the same position before replacement.
- When remove the thermo control amp., never turn the bracket which is equipped the top of the thermo control amp.
- Check for the leakages when recharging refrigerant. Leak Test.