Rear Seat

REAR SEAT

Disassembly and Assembly


SEATBACK

Disassembly
1.Remove the armrest assembly.





- Remove the seatback retainers (1), and then open the fasteners (2).
- Remove the armrest hinge bracket mounting nuts.





- Remove the pawl of armrest hinge inner bush, and then slide armrest assembly.
2.Remove the seatback trim and seatback pad.





- Remove the seatback retainers (1), and then open the fasteners (2).





- Remove the headrest holder.

CAUTION:
Before installing headrest holder check its orientation.
(front/rear and right/left)
- Remove the seatback trim and seatback pad from seatback frame.
- Remove the hog rings to separate the seatback trim and seatback pad.
3.Remove the seatback silencer.
4.Remove the seatback frame.





- Remove the pawls, and then remove outer hinge finisher.

Broken triangle indicates : Pawl

- Remove the mounting bolts (inside, outside), and then remove seatback frame.
Assembly
Assemble in the reverse order of disassembly.

CAUTION:
Install the hog rings of seatback trim in position, and then securely connect the trim or trim cord with the seatback frame.

SEAT CUSHION

Disassembly
1.Remove the seatback assembly.





- Remove the seatback retainers (1), and then open the fasteners (2).





- Remove the pawls, and then remove outer hinge finisher.

Broken triangle indicates : Pawl

- Remove the mounting bolts (inside, outside), and then remove seatback frame.
2.Remove the seat cushion trim and seat cushion pad.





- Remove the seat cushion retainers from seat cushion back side.
- Remove the seat cushion trim and seat cushion pad from seat cushion frame.
- Remove the hog rings to separate the seat cushion trim and seat cushion pad.
3.Remove the seat cushion silencer.
4.Remove the seat belt buckle. Removal And Installation.





5.Remove the clip and pawls, and then remove inner finisher.

Broken circle indicates : Clip
Broken triangle indicates : Pawl

6.Remove the reclining device cover.
- Remove the clip.
- Remove the reclining strap mounting bolt.

CAUTION:
Perform it after seatback folded state.
Assembly
Assemble in the reverse order of disassembly.

CAUTION:
Install the hog rings of seat cushion trim in position, and then securely connect the trim or trim cord with the seat cushion pad wire.

ARMREST ASSEMBLY

Disassembly





1.Remove the pawls, and then remove cup holder.

Broken triangle indicates : Pawl

2.Remove the armrest inner hinge bush.
3.Remove the hinge bracket.
- Remove the pawl of armrest hinge bush, and then remove armrest hinge bracket from armrest assembly.
- Remove the armrest hinge finisher from armrest hinge bracket.
Assembly
Assemble in the reverse order of disassembly.