Without Intelligent Key System

RADIATOR CORE SUPPORT

Removal and Installation


RADIATOR CORE SUPPORT UPPER

REMOVAL
1.Remove front bumper fascia and bumper reinforcement. Removal And Installation.
2.Remove hood lock. Without Intelligent Key System.
3.Remove front combination lamps (LH/RH). Refer toRemoval And Installation.
4.Remove air guide.
5.Remove horn. Removal And Installation.
6.Remove crash zone sensor. Removal And Installation.
7.Remove ambient sensor. Removal And Installation.
8.Disconnect all harness from radiator core support upper.
9.Remove air duct assembly. Removal And Installation.
10.Remove radiator core support upper bracket (LH/RH).
11.Remove mounting bolts, and then remove radiator core support upper.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
- After installation, adjust the following parts.
- Front combination lamp: Aiming Adjustment Procedure.

RADIATOR CORE SUPPORT LOWER

REMOVAL
1.Remove front bumper fascia and bumper reinforcement. Removal And Installation.
2.Remove air guide.
3.Remove radiator core lower stay.
4.Remove clips of fender protector.
5.Remove floor under cover. Removal And Installation.





6.Use a belts (A) to suspend it to prevent it from falling.

CAUTION:
Never damage radiator and condenser.
7.Remove mounting bolts, and then remove radiator core support lower.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
- After installation, adjust the following parts.
- Front combination lamp: Aiming Adjustment Procedure.