Disassembly And Assembly

OUTSIDE MIRROR

GLASS MIRROR : Disassembly and Assembly


DISASSEMBLY

1.Place the glass mirror upward.
2.Put a strip of protective tape (B) on housing assembly.
3.Insert a small flat-bladed screwdriver (A) into the recess at lower side between glass mirror (1) and actuator (2), and push up pawls to remove glass mirror lower side.
NOTE:
Insert a small flat-bladed screwdriver into recesses, and push up while rotating (twisting) to make work easier.





4.Insert a small flat-bladed screwdriver at LH/RH side between glass mirror and actuator, and push up pawls to remove glass mirror LH/RH side.
NOTE:
Insert a small flat-bladed screwdriver into recesses, and push up while rotating (twisting) to make work easier.

ASSEMBLY

Assemble in the reverse order of disassembly.

CAUTION:
After installation, visually check that pawls are securely engaged.