Without Intelligent Key System

DOOR LOCK AND UNLOCK SWITCH

DRIVER SIDE : Diagnosis Procedure


1. CHECK DOOR LOCK AND UNLOCK SWITCH INPUT SIGNAL

1.Turn ignition switch OFF.
2.Disconnect power window main switch connector.
3.Check signal between power window main switch harness connector and ground using oscilloscope.





Is the inspection result normal?
YES- GO TO 4.
NO- GO TO 2.

2. CHECK DOOR LOCK AND UNLOCK SWITCH CIRCUIT

1.Disconnect BCM connector and front power window switch (passenger side) connector.
2.Check continuity between BCM harness connector and power window main switch harness connector.





3.Check continuity between BCM harness connector and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace harness.

3. CHECK BCM OUTPUT SIGNAL

1.Connect BCM connector.
2.Check signal between BCM harness connector and ground using oscilloscope.





Is the inspection result normal?
YES- GO TO 6.
NO- Replace BCM. Removal And Installation.

4. CHECK DOOR LOCK AND UNLOCK SWITCH GROUND

Check continuity between power window main switch harness connector and ground.





Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace harness.

5. CHECK DOOR LOCK AND UNLOCK SWITCH

Without Intelligent Key System.
Is the inspection result normal?
YES- GO TO 6.
NO- Replace power window main switch. Service and Repair.

6. CHECK INTERMITTENT INCIDENT

Intermittent Incident.
- INSPECTION END