Removal And Installation

REAR PILLAR FINISHER

Removal and Installation


REMOVAL






Disengage rear pillar finisher fixing clips using remover tool (A), and then remove rear pillar finisher.






CAUTION:
Apply protective tape (B) to the body side to protect from damage.

INSTALLATION

Note the following, and install in the reverse order of removal.

CAUTION:
- Always replace double-faced adhesive tape and dips with a new one, if rear pillar finisher is reused.
- When installing rear pillar finisher, check that clips are securely fitted in rear pillar panel holes, and then press them it.