Audio

AUDIO SYSTEM

System Description


AUDIO SYSTEM

Audio functions
x: Applicable






When the audio system is on, radio signals are received by the radio antenna. The audio unit then sends audio signals to the each speaker.

FUNCTION DESCRIPTION

AM/FM Radio Mode
- AM/FM radio tuner is built into audio unit.
- Radio signals are received by radio antenna, next they are amplified by antenna amp., and finally the they are input to audio unit. (Antenna amp. is built into antenna base.)
- Audio unit outputs the sound signal to each speaker.
CD Mode
- CD function is built into audio unit.
- Audio unit outputs sound signal to each speaker when CD is inserted to audio unit.
iPod(R) Connection
- Connect iPod(R) and iPod adapter with wire harness and iPod adapter input iPod sound signal from iPod(R).
- When iPod mode is selected, iPod adapter outputs iPod sound signal to audio unit.
- Audio unit outputs the sound signal to each speaker.
AUX Connection
- When the external device is connected to the AUX (auxiliary) input jack of the audio unit, the external device inputs a sound signal to the audio unit.
- When AUX mode is selected, audio unit outputs sound signal to each speaker.
Speed Sensitive Volume
- Volume level of this system gone up and down automatically in proportion to the vehicle speed.
- The control level can be selected by the customer.
Hands-free phone system
For further information about the hands-free phone system, System Description.