P Position Warning Does Not Operate

P POSITION WARNING DOES NOT OPERATE

Diagnosis Procedure


1. CHECK POWER POSITION

Check if ignition switch position is changing or not.
Does ignition switch position change?
YES- GO TO 2.
NO- Check BCM for DTC. Testing and Inspection.

2. CHECK DETENTION SWITCH

Check BCM for DTC.
Testing and Inspection.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.
Intelligent Key Warning Buzzer.
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. CHECK BUZZER (COMBINATION METER)

Check buzzer (combination meter).
With Intelligent Key System.
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace the malfunctioning parts.

5. CHECK DOOR SWITCH

Check door switch (driver side).
With Intelligent Key System.
Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace the malfunctioning parts.

6. CHECK INSIDE KEY ANTENNA

Check inside key antenna.
- Instrument center: B2621.
- Luggage room: B2622.
Is the inspection result normal?
YES- GO TO 7.
NO- Repair or replace the malfunctioning parts.

7. CHECK KEY WARNING LAMP

Check key warning lamp.
Key Warning Lamp.
Is the inspection result normal?
YES- GO TO 8.
NO- Repair or replace the malfunctioning parts.

8. CHECK SHIFT P WARNING LAMP

Check shift P warning lamp.
Work Flow.
Is the inspection result normal?
YES- GO TO 9.
NO- Repair or replace the malfunctioning parts.

9. CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Intermittent Incident.
NO- GO TO 1.