Removal And Installation

AIR BREATHER HOSE

Removal and Installation


REMOVAL

1.Remove air cleaner assembly. .
2.Disconnect clip from bracket and remove air breather hose.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Install air breather hose with paint mark facing upward.
- Insert air breather hose a minimum of 17mm (0.67 in) onto air breather tube (to end of air breather tubes radius end).
- Install air breather hose to bracket by fully inserting the clip.
- Make sure there are no pinched or restricted areas on air breather hose caused by bending or winding when installing it.