For Dealer Inventory Vehicles (Vehicle Has Not Been Sold to A Customer)

For dealer inventory vehicles:
(Vehicle has not been sold to a customer.)

1. Lift the vehicle on a hoist.





2. Locate the bolts shown in Figure 1.

3. One at a time - loosen each bolt 1/4 to 1/2 turn and then re-torque to the final torque specification:

^ Four (4) transverse link bolts: Torque to 155 N-m (16 kg-m, 114 ft-lb).

^ Two (2) power steering rack bolts: Torque to 155 N-m (16 kg-m, 114 ft-lb).

NOTE:
Make sure to use a wrench to hold the nut on the top side of each bolt.