Crankshaft Main Bearing

SERVICE DATA AND SPECIFICATIONS (SDS)

Main Bearing


MAIN BEARING

Unit: mm (in)











UNDERSIZE

Unit: mm (in)






MAIN BEARING OIL CLEARANCE

Unit: mm (in)














Tightening the main bearing cap bolts. Measure d1 and d2 as shown.

- For d2, select the minimum diameter in the measuring area.
- If the difference between d1 and d2 exceeds the limit, replace the bolts for assembly.

Limit (d1 - d2): 0.11 mm (0.0043 in)