Air Cleaner Fresh Air Duct/Hose: Service and Repair

AIR CLEANER AND AIR DUCT

Removal and Installation












REMOVAL

1.Remove engine room cover.
2.Remove front air duct.
3.Disconnect the blow-by hose.
4.Disconnect the tube clamp at the electric throttle control actuator and at the air duct hose.
5.Remove air duct hose.
6.Disconnect mass air flow sensor.
7.Remove mass air flow sensor from air cleaner assembly, as necessary.

CAUTION:
Handle mass air flow sensor with care.
- Do not shock it.
- Do not disassemble it.
- Do not touch its sensor.
8.Remove air cleaner assembly.

INSTALLATION

Installation is in the reverse order of removal.