Work Flow

DIAGNOSIS AND REPAIR WORK FLOW

Work Flow


DETAILED FLOW


1. OBTAIN INFORMATION ABOUT SYMPTOM

Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurred.
- GO TO 2

2. CHECK SYMPTOM

- Check the symptom based on the information obtained from the customer.
- Check to see if any other malfunctions are present.
- GO TO 3

3. CHECK CONSULT SELF-DIAGNOSIS RESULTS

Connect CONSULT and perform "SELF-DIAGNOSIS". CONSULT Function (Meter/M&A).
Are self-diagnosis results normal?
YES- GO TO 4
NO- Repair or replace the malfunctioning parts, GO TO 5

4. NARROW DOWN MALFUNCTIONING PARTS THROUGH SYMPTOM DIAGNOSIS

Perform symptom diagnosis and repair or replace the identified malfunctioning parts.
- GO TO 5

5. FINAL CHECK

Check that the warning buzzer in the combination meter operates normally.
Does it operate normally?
YES- Inspection End.
NO- GO TO 1