Without Intelligent Key

B26EA KEY REGISTRATION

Description

When the registered keyfob is carried, the door lock/unlock operation and the push-button ignition switch operation become possible.


DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PERFORM DTC CONFIRMATION PROCEDURE

1.Perform initialization using CONSULT. Reregister all keyfobs.
For initialization and registration of keyfob, refer to "CONSULT Operation Manual NATS-IVIS/NVIS".
2.Check "Self-diagnostic result" using CONSULT.
Is DTC detected?
YES- Go to "Diagnosis Procedure".
NO- Inspection End


Diagnosis Procedure


1. PERFORM INITIALIZATION

1.Perform initialization using CONSULT. Reregister all keyfobs.
For initialization and registration of keyfob, refer to "CONSULT Operation Manual NATS-IVIS/NVIS".
2.Check "Self-diagnostic result" using CONSULT.
Is DTC detected?
YES- GO TO 2.
NO- Inspection End

2. REPLACE KEYFOB

1.Replace keyfob. Reregister all keyfobs.
2.Perform initialization using CONSULT. For initialization, refer to "CONSULT Operation Manual NATS-IVIS/
NVIS".
3.Check "Self-diagnostic result" using CONSULT.
Is DTC detected?
YES- Replace BCM. Service and Repair.
NO- Inspection End