LH Only Anti-Pinch-Sedan

REAR POWER WINDOW SWITCH

Removal and Installation


REMOVAL

1.Release the pawls, using suitable tool then lift the rear power window switch and finisher (2) upward as an assembly.





CAUTION:
Wrap a cloth around suitable tool to protect components from damage.
2.Disconnect the harness connector.
3.Remove the rear power window switch and finisher (2) assembly from the rear door finisher.
4.Release the tab (one on each side) with a suitable tool (A) , then separate the rear power window switch (1) from the switch finisher (2).





CAUTION:
Do not bend back the pawls of the switch finisher too far or breakage will occur.

INSTALLATION

Installation is in the reverse order of removal.