Removal And Installation

CONTROL CABLE

Removal and Installation


REMOVAL

1.Move shift selector to "P".
2.Remove the air filter assembly. Service and Repair.
3.Remove the shift selector control cable nut and shift selector control cable form the manual lever.
4.Remove the lock plate and the shift selector control cable from the bracket.
5.Remove the center console. Exploded View.
6.Remove the bracket covering the retainer grommet.
7.Remove the retainer grommet bolts and the retainer grommet.
8.Remove the shift selector control cable from the shift selector assembly.
9.Remove the shift selector control cable from the vehicle.

INSTALLATION

Installation is in the reverse order of removal.
- When installing the shift selector control cable to the shift selector assembly, make sure that the shift selector control cable socket is fully pressed into the shift selector assembly, and the shift selector control cable end is fully pressed in with the ribbed surface facing upward.
- After installation is complete, adjust and check the CVT position. Inspection.