Removal And Installation

CONTROL CABLE

Removal and Installation


REMOVAL

1.Move shift selector to "P".
2.Remove the air filter assembly. Service and Repair.
3.Remove the control cable nut and control cable from the manual lever.
4.Remove the lock plate and the control cable from the bracket.
5.Remove the center console. Disassembly And Assembly.
6.Remove the bracket covering the retainer grommet.
7.Remove the retainer grommet bolts and the retainer grommet.
8.Remove the control cable from the shift selector assembly.
9.Remove the control cable from the vehicle.

INSTALLATION

Installation is in the reverse order of removal.
- When installing the control cable to the shift selector assembly, make sure that the control cable socket is fully pressed into the shift selector assembly, and the control cable end is fully pressed in with the ribbed surface facing upward.
- After installation is complete, adjust and check the CVT position. Inspection.