Removal And Installation

AIR BREATHER HOSE

Removal and Installation


REMOVAL

1.Remove air cleaner assembly. Service and Repair.
2.Disconnect clip from bracket and remove air breather hose.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Install air breather hose with paint mark facing upward.
- Insert air breather hose a minimum of 17mm (0.67 in) onto air breather tube (to end of air breather tubes radius end).
- Install air breather hose to bracket by fully inserting the clip.
- Make sure there are no pinched or restricted areas on air breather hose caused by bending or winding when installing it.