Low-Pressure Flexible Hose

LOW-PRESSURE FLEXIBLE HOSE

Removal and Installation for Low-Pressure Flexible Hose


QR25DE

Removal

CAUTION:
Cap or wrap the joint of the hose with a suitable material such as vinyl tape to avoid the entry of contaminants.
1.Discharge the refrigerant. HFC-134A (R-134A) Service Procedure.
2.Remove the front air duct. Service and Repair.
3.Disconnect the low-pressure flexible hose from the low pressure pipe.
4.Disconnect the low-pressure flexible hose from the compressor.
5.Remove the low-pressure flexible hose. Component.
Installation
Installation is in the reverse order of removal.

CAUTION:
- Do not reuse the O-rings.
- Apply A/C compressor oil to the new O-rings for installation.
- After recharging the refrigerant, check for leaks. Checking Of Refrigerant Leaks.

VQ35DE

Removal

CAUTION:
Cap or wrap the joint of the hose with a suitable material such as vinyl tape to avoid the entry of contaminants.
HA
1.Discharge the refrigerant. HFC-134A (R-134A) Service Procedure.
2.Remove the engine room cover.
3.Remove the engine cooling fan and shroud assembly. Removal and Installation.
4.Disconnect the low-pressure flexible hose from the low pressure pipe.
5.Disconnect the low-pressure flexible hose from the compressor.
6.Remove the low-pressure flexible hose. Component.
Installation
Installation is in the reverse order of removal.

CAUTION:
- Do not reuse the O-rings.
- Apply A/C compressor oil to the new O-rings for installation.
- After recharging the refrigerant, check for leaks. Checking Of Refrigerant Leaks.