Front Combination Lamp

FRONT COMBINATION LAMP

Bulb Replacement


HEADLAMP


WARNING:
- Do not touch bulb by hand while it is lit or right after being turned off, burning may result.

CAUTION:
- Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from bulb.
Removal
1.Disconnect negative battery terminal (xenon only).
2.Position the fender protector aside. Sedan (sedan) or Coupe (coupe).
3.Turn the headlamp bulb sockets counterclockwise to unlock and remove them (halogen).
4.Remove the plastic cover, disconnect the ignitor, unlock the retaining spring to unlock and remove the bulb (xenon only).
5.Turn the high beam lamp bulb socket counterclockwise to unlock and remove it.
Installation
Installation is in the reverse order of removal.

CAUTION:
- After installing the headlamp bulb, be sure to install the plastic cap securely to ensure watertightness.

SIDE MARKER LAMP

Removal
1.Position the fender protector aside. Sedan (sedan) or Coupe (coupe).
2.Turn the bulb socket counterclockwise to unlock it.
3.Pull the side marker bulb to remove it.
Installation
Installation is in the reverse order of removal.

CAUTION:
- After installing the bulb, be sure to install the plastic cap securely to ensure watertightness.

FRONT PARK/TURN SIGNAL LAMP

Removal
1.Position the fender protector aside. Sedan (sedan) or Coupe (coupe).
2.Turn the bulb socket counterclockwise to unlock it.
3.Pull the front park/turn signal bulb to remove it.
Installation
Installation is in the reverse order of removal.

CAUTION:
- After installing the bulb, be sure to install the bulb socket securely to ensure watertightness.