Rear Crankshaft Main Bearing Seal: Service and Repair

OIL SEAL

Removal and Installation of Rear Oil Seal


REMOVAL

1.Remove the transaxle. Removal And Installation (M/T), Removal And Installation (CVT).
2.Remove flywheel (MT) or drive plate (CVT).





3.Remove rear oil seal using suitable tool.

CAUTION:
Be careful not to scratch rear oil seal retainer.

INSTALLATION

1.Apply new engine oil to new oil seal and install it using a suitable tool.





- Install new oil seal in the direction shown.





- Press fit new oil seal straight using a suitable drift, to avoid causing burrs or tilting.





- Press in the new oil seal to the specified depth as shown.
2.Installation of the remaining components is in the reverse order of removal.