ABS

PEDAL VIBRATION OR ABS OPERATION SOUND OCCURS

Diagnosis Procedure


CAUTION:
Under the following conditions, ABS is activated and vibration is felt when brake pedal is lightly depressed (just place a foot on it).However, this is normal.
- When shifting gears
- When driving on slippery road
- During cornering at high speed
- When passing over bumps or grooves [at approximately 50 mm (1.97 in) or more]
- When pulling away just after starting engine [at approximately 10 km/h (6 MPH) or higher]

1. SYMPTOM CHECK 1

Check that there are pedal vibrations when the engine is started.
Do vibrations occur?
YES- GO TO 2
NO- Inspect the brake pedal.


2. SYMPTOM CHECK 2

Check that there are ABS operation noises when the engine is started.
Do the operation noises occur?
YES- GO TO 3
NO- Perform self diagnostic result. ABS.

3. SYMPTOM CHECK 3

Check symptoms when electrical component (headlamps, etc.) switches are operated.
Do symptoms occur?
YES- Check if there is a radio, antenna, antenna lead wire, or wiring close to the control unit. If there is, move it farther away.
NO- Inspection End.