Sedan

FRONT SEAT

Removal and Installation - Seatback board


REMOVAL


CAUTION:
- During installation, the wire harness clips must be reinstalled in the holes they were originally in. Do not add additional clips.
NOTE:
If the vehicle has been involved in a collision, the seat must be inspected for damage. For Side And Rollover Collision.
1.Slide the seat to forward position.





2.Remove the seatback board using the following steps:
NOTE:
The seatback board is attached to the seat frame with the following:
- Two top metal clips (A)
- Two side hooks (B)
- Two bottom hooks (C)
a.Pull the middle of seatback board away from the seatback frame while pressing the side hooks (B) inward until the bottom hooks (C) release.
b.Using a suitable tool, pinch the top metal clips (A) to disengage from the slot feature on the seatback frame, then remove the seatback board.

INSTALLATION

Installation is in the reverse order of removal.