Removal And Installation Sedan

TRUNK ROOM TRIM & TRUNK LID FINISHER

Removal and Installation


REMOVAL

TRUNK ROOM TRIM
1.Release the latch, then position rear seatbacks (RH/LH) to the folded down position.
2.Remove the rear seat back trim panel. Sedan.
3.Release the clips, then remove trunk floor carpet.
4.Remove trunk net rear and trunk net side (if installed).
5.Release the clips, then remove trunk rear finisher.
6.Release the clips, then remove trunk side finishers (RH/LH).
7.Remove spare tire cover and trunk floor board (LH).
8.Remove the trunk lid rubber bumpers (RH/LH), then release the clips and remove trunk lid finisher.

INSTALLATION

Installation is in the reverse order of removal.