Removal And Installation Coupe

TRUNK ROOM TRIM & TRUNK LID FINISHER

Removal and Installation


REMOVAL

TRUNK ROOM TRIM
1.Release the latch, then position rear seatbacks (RH/LH) to fold down position.
2.Remove the rear seat back trim.
3.Release the clips, then remove trunk floor carpet.
4.Remove trunk net rear and trunk net side (if equipped).
5.Release the clips, then remove trunk rear finisher.
6.Release the clips, then remove upper trunk finisher.
7.Release the clips, then remove trunk side finishers (RH/LH).
8.Remove spare tire cover and trunk spacers (RH/LH).
9.Release the clips and remove trunk lid finisher.

INSTALLATION

Installation is in the reverse order of removal.