With Intelligent Key

TRUNK LID

TRUNK LID ASSEMBLY : Removal and Installation


REMOVAL

1.Remove trunk lid lock. With Intelligent Key.
2.Disconnect the connectors in the trunk lid assembly and remove the harness clips to remove the harness from the trunk lid assembly.
3.Remove the bolts, and remove the trunk lid assembly.
4.Remove the rear spoiler (if equipped) to transfer to new trunk lid, if necessary. Service and Repair.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- After installing, perform fitting adjustment. With Intelligent Key.
- After adjusting, apply touch-up paint (the body color) to the hinge bolts and around the base of the hinge.