Front Door Window Glass: Adjustments

FRONT DOOR GLASS

Inspection and Adjustment


SYSTEM INITIALIZATION

- If any of the following occur, system initialization must be performed.
- Electric power supply to power window switch or motor is interrupted by blown fuse or disconnecting battery cable, etc.
- Removal and installation of the regulator assembly.
- Removal and installation of the motor from the regulator assembly.
- Removal and installation of the harness connector of the power window switch.
- Operation of the regulator assembly as a unit.
- Removal and installation of the door glass.
- Removal and installation of the door glass run.
- Window is partly opened and or closed multiple times with out being fully closed.
- To perform system initialization, refer to the following:
- For LH ONLY ANTI-PINCH-COUPE, LH Only Anti-Pinch Coupe.
- For LH ONLY ANTI-PINCH-SEDAN, LH Only Anti-Pinch Sedan.
- For LH&RH FRONT ANTI-PINCH-COUPE, LH&RH Front Anti-Pinch Coupe.
- For LH&RH FRONT ANTI-PINCH-SEDAN, LH&RH Front Anti-Pinch Sedan.

INSPECT THE FUNCTION OF THE ANTI-PINCH SYSTEM.

To inspect the anti-pinch system, refer to the following:
- For LH ONLY ANTI-PINCH-COUPE, LH Only Anti-Pinch Coupe.
- For LH ONLY ANTI-PINCH-SEDAN, LH Only Anti-Pinch Sedan.
- For LH&RH FRONT ANTI-PINCH-COUPE, LH&RH Front Anti-Pinch Coupe.
- For LH&RH FRONT ANTI-PINCH-SEDAN, LH&RH Front Anti-Pinch Sedan.