Bose Audio Without Navigation Sedan

ANTENNA AMP.

Removal and Installation - Sedan


REMOVAL


CAUTION:
- Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at
least three minutes.
1.Disconnect the negative and positive battery terminals, then wait at least three minutes.
2.Remove the rear pillar finisher RH. Exploded View Sedan.
3.Partially remove the side curtain air bag module RH to gain access to the antenna amp. (1). Removal And Installation.





4.Detach the antenna amp. harness clip (A).
5.Disconnect the antenna amp. connectors (B), 6.Remove the antenna amp. screw (C) and remove the antenna amp. (1).

INSTALLATION

Installation is in the reverse order of removal.