Turn Signals Do Not Operate

TURN SIGNAL AND HAZARD WARNING LAMPS


Turn Signals Do Not Operate

1.CHECK COMBINATION SWITCH INPUT SIGNAL
With CONSULT-III
1. Select "BCM" on CONSULT-III. Select "FLASHER" on "SELECT TEST ITEM" screen.
2. Select "DATA MONITOR". Make sure that "TURN SIGNAL R" and "TURN SIGNAL L" turn ON-OFF linked with operation of combination switch (lighting and turn signal switch).






Without CONSULT-III
Combination Switch Inspection.
OK or NG
OK - Replace the BCM. Service and Repair .
NG - Check combination switch (lighting and turn signal switch). Combination Switch Inspection .