Front Power Window Switch (Passenger Side)

FRONT POWER WINDOW SWITCH (PASSENGER SIDE)

Diagnosis Procedure


1. CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE) INPUT SIGNAL

1.Turn power switch OFF.
2.Disconnect front power window switch (passenger side) connector.
3.Turn power switch ON.
4.Check voltage between front power window switch (passenger side) harness connector and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- GO TO 2.

2. CHECK FRONT WINDOW SWITCH (PASSENGER SIDE) CIRCUIT

1.Turn power switch OFF.
2.Disconnect power window main switch connector.
3.Check continuity between power window main switch harness connector and front power window switch (passenger side) harness connector.





4.Check continuity between power window main switch harness connector and ground.





Is the inspection result normal?
YES- Replace power window main switch. Refer to "Removal and Installation" Service and Repair.
NO- Repair or replace harness.

3. CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE)

Check front power window switch (passenger side).
Refer to "Component Inspection" .
Is the inspection result normal?
YES- GO TO 4.
NO- Replace front power window switch (passenger side). Refer to "Removal and Installation" Service and Repair.

4. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- INSPECTION END


Component Inspection


1. CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE)

1.Turn power switch OFF.
2.Disconnect front power window switch (passenger side) connector.
3.Check front power window switch (passenger side) terminals under the following conditions.





Is the inspection result normal?
YES- INSPECTION END
NO- Replace front power window switch (passenger side). Refer to "Removal and Installation" Service and Repair.