Easy Fill Tire Alert Function

SYSTEM

Easy Fill Tire Alert Function

- This function operates only when the select lever position is in P-range with the power switch ON or with the set the vehicle to READY.
NOTE:
The easy fill tire alert function is recommended to use with the power switch ON.





- This function informs the driver of the satisfaction of the recommended COLD tire pressure.
The hazard warning lamp blinks when reaching the recommended
COLD tire pressure during radio wave reception. After reaching the recommended COLD tire pressure, the horn sounds once and the hazard warning lamp stops blinking.
- When tire pressure becomes a value equal to or more than 30 kPa
2
(0.31 kg/cm, 4 psi) more than the recommended COLD tire pressure, the hazard warning lamp and the horn operates three times.
After deflating the tire and reaching the recommended COLD tire pressure, the horn sounds only once and the hazard warning lamp stops blinking.
NOTE:
- After starting to inflate the tire, it takes a few seconds for the easy fill tire alert to function.
- If there is no response for approximately 15 seconds or more after inflating the tires, cancel the use of the easy fill tire alert function or move the vehicle approximately 1 m (3.2 ft) backward or forward to try again.
The air filler pressure may be weak or out of service area.